Panasonic KX-NS300 Pc Programming Manual page 538

18.2 PBX Configuration—[10-2] CO & Incoming Call—DIL Table & Port Settings
Name
DIL Specifies the DIL destination in
Destination— each time mode.
Day, Lunch,
Break, Night
Tenant Specifies the tenant number, to
Number determine the Time Table by
which calls are distributed
depending on the time of day.
UM Service Specifies the Service Group
Group No. number sent to the Unified
Messaging system when the
incoming call destination is the
floating extension number of a
UM group.
The Service Group number is
used to allow the Unified
Messaging system to send the
applicable greeting message to
the caller.
VM Trunk Specifies the number of the VM
Group No. trunk group sent to the VPS when
the incoming call destination is
the floating extension number of a
VM (DPT) Group. The VM trunk
group number is used to allow the
VPS to send the applicable
greeting message to the caller.
CLI for DIL
When CLI distribution is enabled for a trunk to which DIL distribution is set, incoming trunk calls will be
distributed to the CLI destinations (instead of the DIL destinations) if the caller's identification number is
found in the System Speed Dialling Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a trunk basis.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Card Type
538 PC Programming Manual
Description
Description
Indicates the trunk card
type (reference only).
Value Range
Max. 5 digits
(consisting of 0–9)
1–8
None, 1–64
1–48
Value Range
Card type
Links
PC Programming
Manual References
10.6.1 PBX Configuration—
[2-6-1] System—Numbering
Plan—Main
Feature Manual
References
2.1.1.2 Direct In Line (DIL)
4.3.1 TIE Line Service
Feature Manual
References
2.1.1.2 Direct In Line (DIL)
5.1.3 Tenant Service
5.1.4 Time Service
Feature Manual
References
2.1.1.2 Direct In Line (DIL)
3.2.1 System Features—
3.2.1.39 Service Group
Links
Feature Manual
References
2.1.1.1 Incoming Trunk Call
Features—SUMMARY