Panasonic KX-NS300 Pc Programming Manual page 240

9.16 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPEXT
Name
Extension
Number (SIP
Username)
Password
Connection
FAX Detection
Ability
FAX Sending
Method
Maximum Bit
Rate
T38 FAX Max
Datagram
240 PC Programming Manual
Description
Specifies the extension number
(SIP Username) of the port.
Specifies the password used for
registering a SIP Extension to
the PBX. While it is possible to
enter a password manually for
each SIP Extension, you can
copy the value for Extension
Number to Password by
clicking the Copy to button. This
parameter can only be modified
when the virtual SIP extension
port is set to OUS, and the
programmer must be in On-line
mode.
Indicates the port status. To
change the status of the port,
click the desired cell in the
column, and then select INS or
OUS for the port. This option is
only available in On-line mode.
Enables the use of the FAX
Detection Ability feature.
Specifies the method of
transporting the fax signal.
Specifies the maximum bit rate
of the fax signal.
Specifies the maximum
datagram size when using the T.
38 protocol.
Value Range
Max. 5 digits
(consisting of 0–9)
4–16 characters
(consisting of 0–9, a–
z, A–Z)
INS: The port is in
service
OUS: The port is out
of service
Fault: The port is not
communicating with
the network.
Disable, Enable
G.711 Inband, T.38
No Speed Limit, 2400
bps, 4800 bps, 7200
bps, 9600 bps, 12000
bps, 14400 bps
272–512
Links
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension
Feature Manual
References
5.2.2 SIP (Session
Initiation Protocol)
Extension