Panasonic KX-NS300 Pc Programming Manual page 372

10.9 PBX Configuration—[2-9] System—System Options
Name
SLT—Message
Waiting Lamp Pattern
Whisper OHCA—for
SLT
Call Waiting—
Automatic Call
Waiting for Extension
Call
Busy Out—Busy Out
for Analogue CO
ISDN Voice Path
Connection—Connect
when "Alert" is sent
from ISDN
PT Feature Access—
No. 1–8
ISDN Option—Fwd
from ISDN to ISDN
ISDN Option—Calling
Party Name
Presentation to PRI23
ISDN Option—Calling
Party Name Sending
Format
372 PC Programming Manual
Description
Specifies the Message Waiting Lamp
light pattern of SLTs.
Note
This setting is not applied to
Message Waiting by FSK.
Enables the use of Whisper OHCA to
SLTs and IP-PTs
Selects whether Busy Station
Signalling (BSS) is automatically
performed when an extension user
calls a busy extension.
Enables the PBX to automatically set
a trunk to Busy Out status when a
loop current is not detected,
preventing that trunk from being
used.
Enables the voice path of an ISDN
line to connect even when an "Alert"
signal is received from the telephone
company.
Specifies the System Feature
Access Menu (1–8) shown on the
display of an extension.
Specifies whether alert messages
are sent to the ISDN network. This
setting should be enabled for
networks that disconnect a call if an
alert message is not received.
Specifies whether the name of the
calling party is displayed when
making a call to the ISDN network.
Specifies the sending format of the
calling party name when making a
call to the ISDN network.
Value Range
1–12
Disable, Enable
Disable, Enable
Disable, Enable
Disable, Enable
None, Call Back
Cancel, Call Pickup
Direct, Call Pickup
Group,
DOORPHONE Call,
Door Open, Relay
On, External BGM,
Paging
Mode1: Disable
Mode2: Enable
Enable, Disable
Display, Facility
Links
Feature
Manual
References
2.20.1 Message
Waiting
Feature
Manual
References
2.10.4.4 Whisper
OHCA
Feature
Manual
References
2.1.3.3 Call
Waiting
Feature
Manual
References
2.5.4.6 Trunk
Busy Out