Panasonic KX-NS300 Pc Programming Manual page 66

5.1.2 System Control—Program Update—Update Program File
Click Check to confirm the connection to the FTP server. If a connection is established, the Execute
button will become active.
4.
Click Execute, and then click OK on the confirmation message that appears. When the transfer is
complete, click OK.
Note
•
If downloading cannot be completed within 10 minutes (due to slow network speeds or other
connection problems), the download operation will be cancelled.
Automatic
The Main unit is set to automatically check an FTP server for updated programme files. If an update is
available, the Main unit will download the data.
To download programme files automatically
1. For Download Server, select an FTP site.
To specify a new FTP site, see 27.3.1 Network Service—[3-1] Client Feature—FTP.
2. For Download mode, select one of the following:
•
None: No actions are taken (automatic downloading is disabled).
•
Check only: The specified download server is checked at the specified times. If an e-mail is entered
in Email notification, an e-mail notification is sent when updated files have been discovered.
Note
If Check only is selected, updated files will have to be downloaded manually (see the manual
procedure above).
•
Download automatically: The specified download server is checked at the specified times. If
updated files are discovered, they will be downloaded automatically to the PBX. If an e-mail is entered
in Email notification, an e-mail notification is sent when updated files have been downloaded.
3. In Check time and date, specify when the PBX will contact the server to check for updates. The check
can be performed on a daily or weekly basis.
4. In Email notification specify up to 2 e-mail addresses that will receive an e-mail notification when
updated files have been discovered or when updated files have been downloaded.
Note
If Download automatically is not selected in step 2, specify at least one e-mail address so that an
administrator will be notified when updated files have been discovered.
5. To begin automatic checking for updates according to Check time and date, click Execute.
6. The PBX will now periodically perform checks and downloads as specified in the settings. Click
Download Cancel on this screen to stop automatic programme updates.
Note
When the system is downloading data from an FTP server, if downloading cannot be completed within
10 minutes (due to slow network speeds or other connection problems), the download operation will be
cancelled.
5.1.2 System Control—Program Update—Update Program File
Once updated programme files have been downloaded and are stored on a PBX, they can be used to
update the system files of the PBX. The update process can be set to be automatically performed at a
specified time, or the update process can be carried out manually.
66 PC Programming Manual