Panasonic KX-NS300 Pc Programming Manual page 523

Name
TRG 01– Enables each trunk group for each carrier.
TRG 64 If a cell is highlighted in blue, that trunk
group is enabled for use with that carrier.
Authorisation Code for Tenant
Specifies an Authorisation code for each tenant. The Authorisation codes can be added to the user-dialled
number by specifying "A" command in Modify Command on the Carrier tab.
Name
Authorisation Code for
Tenant—Tenant 1–
Tenant 8
Description
Description
Specifies the
Authorisation code of
each carrier for each
tenant.
16.5 PBX Configuration—[8-5] ARS—Carrier
Value Range
OFF (white), ON
(blue)
Value Range
Max. 16 digits
(consisting of 0–9, *,
and #)
Links
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
Links
Feature Manual
References
2.8.1 Automatic Route
Selection (ARS)
5.1.3 Tenant Service
PC Programming Manual 523