Panasonic KX-NS300 Pc Programming Manual page 615

Name
Alternate Specifies extensions that require a
Extension different transfer sequence than
normal. Calls to these extensions will
be transferred according with the
setting for 24.4 UM Configuration—
[5-4] System Parameters—
Parameters—PBX Environment—
Alternate Extension Transfer
Sequence (Up to 16 digits / [0-9 * #
D R F T X , ;]).Click Edit and follow
the steps below to edit an alternate
extension.
Adding an Alternate Extension
1.
2.
3.
Editing an Alternate Extension
1.
2.
3.
4.
Deleting an Alternate Extension
1.
2.
3.
Changing the order of Alternate
Extensions
Select an extension and click Move
up or Move down to change its order
in the list. Alternate extensions will be
dialled in order from top to bottom.
Note
List All Names If set to "Enable", callers can listen to
all subscriber names and extension
numbers in the Automated Attendant
service or Custom Service.
Operator Specifies the timing of the operator
Transfer Mode transfer.
Description
Click New.
Enter an extension number.
Click OK.
Select the desired alternate
extension.
Click Edit.
Edit the extension number.
Click OK.
Select the desired alternate
extension.
Click Delete.
Click Yes.
Extension Groups and Logical
Extensions cannot be assigned.
23.2 UM Configuration—[4-2] Service Settings—Parameters
Value Range
Max. 32 extensions
(max. 5 digits per
extension)
Enable, Disable
Transfer
immediately, Do not
transfer immediately
Links
PC Programming
Manual
References
24.4 UM
Configuration—[5-4]
System Parameters
—Parameters—PBX
Environment—
Alternate Extension
Transfer Sequence
(Up to 16 digits /
[0-9 * # D R F T
X , ;])
Feature Manual
References
3.2.1.3 Automated
Attendant (AA)
Feature Manual
References
3.2.1.3 Automated
Attendant (AA)
Feature Manual
References
3.2.1.3 Automated
Attendant (AA)
PC Programming Manual 615