Panasonic KX-NS300 Pc Programming Manual page 279

9.27 PBX Configuration—[1-1] Configuration—Slot
—Port Property - PRI Port
Various settings can be programmed for each PRI port.
Main
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Port Type Selects the port type.
Note
Connection Indicates the port status. To change the
status of the port, click the desired cell in
the column, and then select INS or OUS
for the port.
This option is only available in On-line
mode.
Status Specifies whether the Status Message is
Message sent to the network.
Status Selects what happens to a call when the
Receive Status Message from the network does
not match the actual status of the call.
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Description
•
Each ISDN connection in a QSIG
network must have a master port
on one PBX and a slave port on
another PBX.
•
ISDN extensions can belong to an
incoming call distribution group or
idle extension hunting group. In
this case, an MSN can be
assigned.
Value Range
CO: For connecting to
public network
Extension: For connecting
to extension
QSIG-Slave: For connecting
to private network (slave
port)
QSIG-Master: For
connecting to private
network (master port)
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
No Transmission: Status
Message is not sent.
When error detection
(Mandatory): Send the
Status Message when an
error (Mandatory) is
detected.
When error detection
(Option / Mandatory): Send
the Status Message when
an error (Option or
Mandatory) is detected.
Ignore: Ignore the Status
Message from the network.
Disconnect: Disconnect the
call.
PC Programming Manual
Links
Feature
Manual
References
4.1.2.1
Integrated
Services
Digital Network
(ISDN)—
SUMMARY
4.3.4.1 QSIG
Standard
Features—
SUMMARY
279