Panasonic KX-NS300 Pc Programming Manual page 541

18.3 PBX Configuration—[10-3] CO & Incoming Call
—DDI / DID Table
Incoming trunk calls with DDI/DID numbers can be distributed to specific destinations. Each DDI/DID
number has a destination programmed for each time mode (day/lunch/break/night).
When CLI distribution is enabled for a DDI/DID number, incoming trunk calls with that DDI/DID number will
be distributed to the CLI destinations (instead of the DDI/DID destinations) if the caller's identification
number is found in the System Speed Dialling Table, which is used as the Caller ID Table. CLI distribution
can be enabled or disabled for each time mode (day/lunch/break/night) on a DDI/DID number basis.
A maximum of 1000 DDI/DID numbers can be programmed with other related parameters. 100 numbers are
displayed at a time. To display other sets of numbers, click the applicable tab.
To assign DDI/DID destination numbers, enter directly or click Destination Setting (see 2.1.6 Extension
Number Setting). It is possible to programme DDI/DID numbers and DDI/DID destinations in each time
mode (day/lunch/break/night) for a set of locations in series at once by clicking Automatic Registration, or
to programme DDI/DID names for a set of locations in series at once by clicking Name Generate.
Name
DDI / DID
Number
DDI / DID
Name
DDI / DID
Destination—
Day, Lunch,
Break, Night
Description
Specifies the DDI/DID number.
Specifies the name for the
DDI/DID number which is
shown on the extension's
display when receiving a call
with the DDI/DID number. The
name of the DDI/DID number
can be printed out on SMDR.
Specifies the DDI/DID
destination in each time mode.
18.3 PBX Configuration—[10-3] CO & Incoming Call—DDI / DID Table
Value Range
Max. 32 digits
(consisting of
0–9, *, and #)
Max. 20
characters
Max. 5 digits
(consisting of
0–9)
Links
PC Programming Manual
References
18.3.1 PBX Configuration—[10-3] CO
& Incoming Call—DDI / DID Table—
Automatic Registration
Feature Manual References
2.1.1.3 Direct Inward Dialling (DID)/
Direct Dialling In (DDI)
PC Programming Manual
References
18.3.2 PBX Configuration—[10-3] CO
& Incoming Call—DDI / DID Table—
Name Generate
19.1 PBX Configuration—[11-1]
Maintenance—Main—SMDR Options
—SMDR Options
Feature Manual References
2.1.1.3 Direct Inward Dialling (DID)/
Direct Dialling In (DDI)
PC Programming Manual
References
10.6.1 PBX Configuration—[2-6-1]
System—Numbering Plan—Main
18.3.1 PBX Configuration—[10-3] CO
& Incoming Call—DDI / DID Table—
Automatic Registration
Feature Manual References
2.1.1.3 Direct Inward Dialling (DID)/
Direct Dialling In (DDI)
4.3.1 TIE Line Service
PC Programming Manual 541