Panasonic KX-NS300 Pc Programming Manual page 343

Name
Busy Out Cancel
Simplified Voice
Message Access
Other PBX Extension
Other PBX extension numbers can be used to easily call extensions connected to PBXs at different
locations in a TIE line network. The leading numbers of all PBXs in the network that will be called should be
entered in this table. A maximum of 16 leading numbers can be programmed.
Name Description
Dial Specifies the leading
extension number of
the other PBX.
KX-T7710
The settings of the MESSAGE key and One-touch keys on the KX-T7710 can be programmed.
Note
•
This tab is for programming extensions connected to Expansion Units. For information about setting
up Expansion Units, see 9.33 PBX Configuration—[1-1] Configuration—Slot—Expansion Unit1/
Expansion Unit2/Expansion Unit3.
•
For further information about programming for KX-T7710 phones, refer to the 2.6.7 KX-T7710 One-
touch Dialling in the Feature Manual.
10.6.1 PBX Configuration—[2-6-1] System—Numbering Plan—Main
Description
Specifies the feature
number used to cancel the
Busy Out status of an
analogue trunk.
Specifies the feature
number used to access the
SVM feature to record,
listen to and delete
messages.
Value Range
Max. 3 digits
(consisting of 0–9, *,
and #)
Value Range
Max. 4 digits PC Programming Manual
(consisting of 0–
References
9, *, and #)
10.9 PBX Configuration—[2-9]
System—System Options—
Option 5—Busy Out—Busy Out
for Analogue CO
Feature Manual References
2.5.4.6 Trunk Busy Out
PC Programming Manual
Max. 4 digits
(consisting of 0–
References
9, *, and #)
12.1.8 PBX Configuration—[4-1-8]
Extension—Wired Extension—
Simplified Voice Message
12.2.6 PBX Configuration—[4-2-6]
Extension—Portable Station—
Simplified Voice Message
Feature Manual References
2.16.3 Built-in Simplified Voice
Message (SVM)
PC Programming Manual References
17.1 PBX Configuration—[9-1] Private
Network—TIE Table—Leading Number
Feature Manual References
4.3.1 TIE Line Service
Links
Links
PC Programming Manual 343