Panasonic KX-NS300 Pc Programming Manual page 164

9.2 PBX Configuration—[1-1] Configuration—Slot—System Property
9.2 PBX Configuration—[1-1] Configuration—Slot—
System Property
9.2.1 PBX Configuration—[1-1] Configuration—Slot—System
Property—Main
The properties of the PBX system can be specified.
Main
Name
DSP CODEC G.711
only (SIP extension)
DSP CODEC G.711
only (IP-GW)
DSP CODEC
Priority-1 value only
(others)
System Speed Dial
Download For UT
Extensions
System Status
Name
CPU Usage
Memory Usage
SD card Usage
V-IPGW
Name
Call Signalling Model
164 PC Programming Manual
Description
Specifies whether or not to only use the
G.711 codec for SIP extension calls.
Specifies whether or not to only use the
G.711 codec for IP trunk calls.
Specifies whether or not to only use the
priority 1 codec set for the following
types of calls:
•
IP extension calls
•
SIP trunk calls
Specifies the maximum number of
system speed dial entries that will be
downloaded to KX-UT series SIP
phones.
Displays the system CPU's current processor load, expressed
as a percentage of total capacity (reference only).
Displays the amount of system memory currently being used,
displayed as a percentage of total capacity (reference only).
Displays the amount of SD Memory Card memory currently
being used, displayed as a percentage of total capacity
(reference only).
Specifies whether to carry out a call control
(H.225) process directly between the cards
or through a gatekeeper.
Description
Description
Value
Range
Enable,
Disable
Enable,
Disable
Enable,
Disable
0–300 PC Programming
Manual References
9.20 PBX Configuration
—[1-1] Configuration—
Slot—Port Property—
V-UTEXT—Option—
System Speed Dial
Download
Value Range
0–100%
0–100%
0–100%
Value Range
Direct, GateKeeper
Links
Links
Links