Panasonic KX-NS300 Pc Programming Manual page 217

Name
CLIP (Receive)
CLIR
CNIP (Send)
CNIP (Receive)
Blind
Transfer(REFER)
Attended
Transfer(REFER)
Advanced
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Connection
Diversion
Header
9.10 PBX Configuration—[1-1] Configuration—Slot—Port Property—V-SIPGW
Description
Specify where caller information about
an incoming call is obtained:
•
Prioritised: P-Asserted-Identity→P-
Preferred-Identity→From Header
•
Fixed: From Header
Specifies whether to allow restriction of
the display of the CLIP number on the
called party's telephone when making a
SIP trunk call.
Specifies whether to send the caller's
name to be displayed on the called
party's telephone when making a SIP
trunk call.
Specifies whether to receive the caller's
name to be displayed on the called
party's telephone when receiving a SIP
trunk call.
Specifies whether to allow blind transfers
using REFER.
Specifies whether to allow attended
transfers using REFER.
Description
Indicates the port status. To change the status
of the port, click the desired cell in the
column, and then select INS or OUS for the
port.
This option is only available in On-line mode.
Enable this setting to allow the specified SIP
trunks to detect incoming Mobile Device
Access calls from MEX-enabled mobile
devices.
Value Range
P-Asserted-Identity Header,
From Header
Note
•
To copy values from
one location to another,
click Copy to.
•
If the Channel
Attribute setting of the
port is "Additional", the
setting cannot be
changed.
Yes, No
Yes, No
Yes, No
Yes, No
Yes, No
Value Range
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
Disable, Enable
PC Programming Manual
Links
Links
217