Panasonic KX-NS300 Pc Programming Manual page 47

Q What is the procedure to modify the Numbering Plan?
A •
Perform the following steps:
1.
Confirm that the Numbering Plan you will change is not currently being used by any
extensions (see 6.5 Tool—Extension List View).
If it is being used by extensions, temporarily change the extension numbers of those
extensions to that of another numbering plan, or delete the extension number (see
12.1.1 PBX Configuration—[4-1-1] Extension—Wired Extension—Extension Settings
and 12.2.1 PBX Configuration—[4-2-1] Extension—Portable Station—Extension
Settings).
2.
Clear the Leading Number cell.
3.
Click Apply.
4.
Modify the No. of Additional Digits cell as required.
5.
Click Apply.
6.
Enter the desired value in the Leading Number cell.
7.
Click Apply.
8.
Set all extension ports to OUS status.
9.
On the relevant screens, set the extension numbers of extensions to the desired values.
10.
Set all extension ports back to INS status.
Q When modifying the Numbering Plan, I cannot change the Leading Number.
A •
It is not possible to use the same Leading Number for 2 extension blocks, or to use a number
that could possibly overlap with another Leading Number.
So, for example, if "2" is already set as a Leading Number it is not possible to set "21" as another
Leading Number because of the possible overlap of extension numbers.
The number you are trying to store cannot be used if it is already being used by:
–
A feature number
–
Another extension block
–
A Dial setting (see 17.1 PBX Configuration—[9-1] Private Network—TIE Table)
–
Quick Dialling (see 10.6.2 PBX Configuration—[2-6-2] System—Numbering Plan—Quick
Dial)
In any of these cases, choose another number.
Q When modifying the Numbering Plan, how do I set a 1-digit extension number?
2.3 Frequently Asked Questions (FAQ)
PC Programming Manual 47