Panasonic KX-NS300 Pc Programming Manual page 281

Name
Subscriber Specifies the number used as
Number the CLIP number.
Ringback Enables the PBX to send a
Tone to ringback tone to an outside
Outside caller when the network cannot
Caller send the tone.
ISDN Selects the method used to
Outgoing send dialled digits to the
Call Type network.
ISDN Enables the use of the
Centrex telephone company's ISDN
Centrex Service features.
Networking Enables transmission of
Data extension status data to
Transfer connected PBXs in a network.
This setting is only available
when Port Type on this screen
has been set to QSIG-Slave or
QSIG-Master.
9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Description Value Range
Max. 16 digits
(consisting of 0–9, *, and
#)
Disable, Enable
En-bloc: The PBX sends
all of the dialled digits at
once after the extension
user completes dialling.
The PBX recognises the
end of dialling when (1) #
is dialled, if programmed,
(2) a pre-programmed
telephone number is
dialled, or (3) the inter-
digit timer expires.
Overlap: The PBX sends
dialled digits one at a
time.
Disable, Enable
Off, On
Links
Feature Manual
References
4.1.2.2 Calling/Connected
Line Identification
Presentation (CLIP/
COLP)
PC Programming
Manual References
9.1 PBX Configuration—
[1-1] Configuration—Slot
10.3 PBX Configuration—
[2-3] System—Timers &
Counters—Dial / IRNA /
Recall / Tone—Dial—
Extension Inter-digit (s)
10.9 PBX Configuration—
[2-9] System—System
Options—Option 2—ISDN
en Bloc Dial—[#] as End
of Dial for en Bloc mode
11.1.4 PBX Configuration
—[3-1-4] Group—Trunk
Group—Dialling Plan
Feature Manual
References
4.1.2.1 Integrated
Services Digital Network
(ISDN)—SUMMARY
Feature Manual
References
4.1.2.1 Integrated
Services Digital Network
(ISDN)—SUMMARY
PC Programming
Manual References
17 PBX Configuration—[9]
Private Network
Feature Manual
References
4.3.5.1 Network Direct
Station Selection (NDSS)
PC Programming Manual 281