Panasonic KX-NS300 Pc Programming Manual page 645

Hybrid ip-pbx
Hide thumbs Also See for KX-NS300:
Table of Contents

Advertisement

Intercom Paging Parameters
Unified Messaging Intercom Paging functions in conjunction with the Intercom Paging feature of the PBX. It
allows the system to page the called party (announce the caller's name, line number, etc.) while the caller is
placed on hold. To utilise this feature, Intercom Paging must be available for the PBX, and the Unified
Messaging system must be properly programmed.
Name
No Answer Time for
Intercom Paging
(1-30 s)
Announcement
Repeat Cycle (1-3
times)
Intercom Paging
Retry (1-10 times)
Caller Recorded
Name Announce
Mode
Fax Management
You can programme the system to automatically detect incoming fax calls and forward those calls to a fax
extension. You can specify a maximum of 2 fax extensions as the destination for faxes; if the main fax
extension is not available to receive a fax, the system will forward the fax call to the alternate fax extension.
Description
Specifies the length of time (in
seconds) the system waits before
concluding Intercom Paging when
there is no answer. The system will
return to the caller if the paged party
does not respond before this timer
expires.
Specifies the number of times the
system announces the page.
Example:
"I have a call for (name)".
Specifies the number of times to retry
paging when the called subscriber
has set Incomplete Call Handling
for No Answer/Incomplete Call
Handling for Busy to "Page the
mailbox owner by intercom paging"
and the subscriber is busy or if there
is no answer.
Determines whether or not the
system announces the caller's name
during paging. (In order for the name
to be announced, it must be recorded
beforehand.)
24.4 UM Configuration—[5-4] System Parameters—Parameters
Value
Range
1–30 s
1–3 times
1–10
times
Disable,
Enable
Links
Feature Manual
References
3.2.1.23 Intercom Paging
Feature Manual
References
3.2.1.23 Intercom Paging
PC Programming
Manual References
20.1.2 UM Configuration—
[1-2] Mailbox Settings—Full
Setting—Incomplete Call
Handling for No Answer
20.1.2 UM Configuration—
[1-2] Mailbox Settings—Full
Setting—Incomplete Call
Handling for Busy
Feature Manual
References
3.2.1.23 Intercom Paging
Feature Manual
References
3.2.1.23 Intercom Paging
PC Programming Manual
645

Advertisement

Table of Contents
loading

Table of Contents