Panasonic KX-NS300 Pc Programming Manual page 559

19.3 PBX Configuration—[11-3] Maintenance—CS
Synchronisation
19.3.1 PBX Configuration—[11-3-1] Maintenance—CS
Synchronisation—Air Synchronisation
You can programme and view settings for Air Synchronisation Groups.
Select an Air Synchronisation Group (1-4) to programme from the Air Synchronisation Group Number
drop-down list.
It is possible to synchronise CSs with each other within the air synchronisation group.
Click Sort to reorder CSs with traditional CSs first, followed by IP-CSs.
To open the screen described in 7.4.4 Utility—Monitor/Trace—CS Status Monitor—Air Sync Group, click
CS Status Monitor.
Air Synchronisation Groups can be programmed only in On-line mode.
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Adding CSs
Follow the steps below to add CSs to the air synchronisation group.
1.
Connect the CS to be registered to the network and, if necessary, the power supply.
2.
Click Add.
A dialogue box will appear. Non-registered (available) CSs are displayed on the left.
3.
Highlight CSs and click the right arrow to select them for addition.
4.
Click OK.
Deleting CSs
Follow the steps below to delete CSs from the air synchronisation group.
1.
Click Delete.
A dialogue box will appear. Registered CSs are displayed on the left.
2.
Highlight CSs and click the right arrow to select them for deletion.
3.
Click OK.
Name
Air Synchronisation
Group Number
Index
CS Name
Connection
Status
19.3 PBX Configuration—[11-3] Maintenance—CS Synchronisation
Description
Select the air synchronisation group to
programme.
Indicates the CS number (reference
only).
Indicates the name of the CS (reference
only).
Indicates the port status. To change the
status of the port, click the desired cell
in the column, and then select INS or
OUS for the port.
Indicates whether a certain CS is
registered (reference only).
Value Range
1–4
1–16
Max. 20 characters
INS: The port is in service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
-, Registered
PC Programming Manual
Links
559