Panasonic KX-NS300 Pc Programming Manual page 68

5.1.3 System Control—Program Update—Plug and Update
4. Click Execute.
The programme files are updated to the PBX.
Timed Update (Automatic update)
Specify which cards or devices to update and a time to execute the update.
1. In Email Notification, specify up to 2 e-mail addresses that will receive a notification when programme
files have been updated.
2.
Updated programme files that can be used to update cards or devices installed in the system are listed
in Available Program File(s). In Select the target to update, specify which cards or devices will be
updated using the files listed by checking the boxes next to each item.
Note
When selecting an item, a warning message may be displayed. Confirm the contents of the warning,
and then click OK to continue.
3.
In Update Time, specify the time of day when the update will be executed.
4.
Click Apply.
5. Click Execute.
The programme files will be updated to the PBX at the specified time.
Note
•
For CS programme files, in order for CS cards to be displayed on this screen, the cards must be set
to INS, and the ports of the card must be set to OUS.
5.1.3 System Control—Program Update—Plug and Update
The Plug and Update feature allows IP-PTs, IP-CSs, and certain PSs to be automatically updated to the
latest software version when they are registered to the PBX. When Plug and Update is enabled, the version
number of the system software stored on the SD Memory Card or USB memory is compared to the system
software currently in the device, after the device has been registered to the PBX. If the software on the SD
Memory Card or USB memory is newer, it is downloaded to the device. By default, Plug and Update is set to
Off for all device types.
1.
For each device type, select On for the features you want to enable.
•
Plug & Update for IP-PT/IP-CS: Enable Plug and Update for IP-PTs and IP-CSs.
•
Plug & Update for TCAx85: Enable Plug and Update for supported PSs.
•
Manual Update for TCAx85: Enable manual updates for supported PSs.
2.
Click OK.
Note
•
Plug & Update for TCAx85 and Manual Update for TCAx85 cannot be set to enable at the same
time.
•
The following PSs support this feature:
–
KX-TCA185
–
KX-TCA285
–
KX-TCA385
68 PC Programming Manual