Panasonic KX-NS300 Pc Programming Manual page 102

7.2 Utility—File
7.2 Utility—File
7.2.1 Utility—File—File Transfer PC to PBX
Copies PBX system data files from the connected PC to the System Memory installed in the PBX. Pre-
existing files in System Memory Card are overwritten.
This option is only available at Installer level when programming in On-line mode.
To install new main system data that has been copied to the PBX, use the System Reset utility (see
5.3 System Control—System Reset) for DFSYS files.
The PBX examines the header information of a file to determine 2 things: whether the file contains
supported data, and which system component the file applies to.
Only files whose header information matches that of a system file supported by the PBX can be transferred.
Attempting to transfer any other type of file results in an error message.
The names of all files that can be stored in the System Memory are as follows:
System Data
Name on System Memory
DFSYS
DFSYS_R
DFSYS-file-format data that is transferred to the PBX is saved as "DFSYS_R".
*1
To transfer files to the System Memory
1. The dialogue box will be displayed.
2. Select the file to upload, and click OK.
A window showing the upload progress will be displayed.
While transferring files to the System Memory, the PBX automatically renames them according to the
header information.
A message will be displayed when the transfer is complete.
3. Click OK.
7.2.2 Utility—File—File Transfer PBX to PC
Copies system data files from the System Memory and SD card installed in the PBX to the connected PC.
This option is only available at Installer level when programming in On-line mode.
The files that can be downloaded from the System Memory and SD card are as follows:
File Name
DFSYS
$SYSERR
$SYSERR1–$SYSERR9
UT_ACS
•
Downloading the DFSYS system data file allows you to make a backup of the configuration of the PBX.
•
The error data files are snapshots of the configuration of the PBX taken automatically when a major error
causes a system reset. If they are generated, consult the seller where you purchased this PBX to identify
102 PC Programming Manual
Corresponding Card
Mother Board
Mother Board
*1
File Type
System data
Error data
KX-UT series SIP phone configuration data