9.30 PBX Configuration—[1-1] Configuration—Slot—Card Property—E1 type MFC-R2 Setting 1
Name
Group-l Code Assignment—
G-ll Code Outgoing Call
Group-l Code Assignment—
G-ll Code Incoming Call [1]–
[15]
Group-l Code Assignment—
Group-ll ANI
MFC-R2 Group-1[*][#]—E1
MFC-R2 Group1[*] code
MFC-R2 Group-1[*][#]—E1
MFC-R2 Group1[#] code
292
PC Programming Manual
Description
Specifies the code for sending Group-ll
code to the telephone company.
Specifies the destination of incoming
trunk calls for each Group-ll code
respectively.
Specifies the Group-ll ANI start code.
Specifies the code value of the Group-1
code when the received Group-1 code
is [*].
Specifies the code value of the Group-1
code when the received Group-1 code
is [#].
Value Range
1–15
Undefined,
Subscriber, Operator,
Collect Call
1–15
11–15
11–15
Links