Panasonic KX-NS300 Pc Programming Manual page 278

9.26 PBX Configuration—[1-1] Configuration—Slot—Port Property - BRI Port
CCBS Option
The Shelf, Slot, and Port for each item are displayed for your reference. For details, see Common
Programming Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
Name
Port Type Selects the port type.
Each ISDN connection in a QSIG
network must have a master port on one
PBX and a slave port on another PBX.
ISDN extensions can belong to an
incoming call distribution group or idle
extension hunting group. In this case, an
MSN can be assigned.
Connection Indicates the port status. To change the
status of the port, click the desired cell in
the column, and then select INS or OUS
for the port.
This option is only available in On-line
mode.
CCBS Type Selects the type of call from the network
initiated by the CCBS (Completion of
Calls to Busy Subscriber) feature, from
which the specified number of digits are
deleted.
CCBS Delete Digits on this screen
specifies the number of digits to delete
from the received number.
CCBS Specifies the number of digits to delete
Delete Digits from the received number when
receiving a call of the specified type
initiated by the CCBS feature from the
network. CCBS Type on this screen
specifies the applicable type of call.
278 PC Programming Manual
Description Value Range
CO: For connecting to
public network
Extension: For
connecting to extension
QSIG-Slave: For
connecting to private
network (slave port)
QSIG-Master: For
connecting to private
network (master port)
INS: The port is in
service.
OUS: The port is out of
service.
Fault: The port is not
communicating with the
network.
All, Unknown,
International, National,
Network specific,
Subscriber, Abbreviated
0–15
Links
Feature
Manual
References
4.1.2.10
Completion of
Calls to Busy
Subscriber
(CCBS)
Feature
Manual
References
4.1.2.10
Completion of
Calls to Busy
Subscriber
(CCBS)