Panasonic KX-NS300 Pc Programming Manual page 665

Name
NTP Enables or disables NTP service with the
server PBX's NTP server for connected KX-UT
series SIP phones.
When this feature is enabled, the PBX
will report to connected KX-UT series
SIP phones the information obtained
from the SNTP server specified in
10.1.2 PBX Configuration—[2-1-2]
System—Date & Time—SNTP /
Daylight Saving.
If this feature is disabled, connected
KX-UT series SIP phones will use their
individually programmed time settings.
27.2.5 Network Service—[2-6] Server Feature—SMTP
Name
Mail Receiving—SMTP
Authentication
Mail Receiving—SMTP over
TLS
Mail Receiving—Receive Port
number (SMTPs)
Mail Receiving—Receive Port
number (SMTP)
27.2.6 Network Service—[2-7] Server Feature—IMAP4
Settings for IMAP4 server functions for the PBX can be programmed.
Name
IMAP4—IMAP4 server
IMAP4—Port Number
IMAP4 over TLS—IMAP4
over TLS
IMAP4 over TLS—Port
Number
CAPABILITY command—
Supporting IDLE response
Authenticated Connection
Timeout—Authenticated
Connection Timeout (min)
Description
Specifies if SMTP authentication is
enabled for mail receiving.
Specifies whether mail receiving uses
Transport Layer Security for SMTP.
Specifies the receiving port number
when using SMTPs.
Specifies the receiving port number
when using SMTP.
Specifies whether to enable the IMAP4 server
functions of the PBX.
Specifies a port number for the IMAP server.
The default value is 143.
Specifies whether to enable TLS encryption for
the IMAP4 server functions of the PBX.
Specifies a port number for the IMAP server
when using TLS encryption. The default value
is 993.
Specifies whether the IMAP4 server will
respond to IDLE commands sent by clients.
Specifies the amount of time of no activity that
is required before an authenticated connection
to the IMAP4 server will be disconnected.
27.2.5 Network Service—[2-6] Server Feature—SMTP
Value
Range
Disable, PC Programming Manual
Enable
References
10.1.2 PBX Configuration—[2-1-2]
System—Date & Time—SNTP /
Daylight Saving—SNTP—SNTP Server
—IP Address
10.1.2 PBX Configuration—[2-1-2]
System—Date & Time—SNTP /
Daylight Saving—SNTP—SNTP Server
—Port Number
10.1.2 PBX Configuration—[2-1-2]
System—Date & Time—SNTP /
Daylight Saving—SNTP—Time Zone—
Time Zone
Description
Description
Links
Value Range Links
Enable, Disable
Enable, Disable
25, 465, 587,
1024–65535
25, 465, 587,
1024–65535
Value Range Links
Enable, Disable
143, 1024–
65535
Enable, Disable
993, 1024–
65535
Enable, Disable
1, 2, 3, 5, 10,
15, 20, 25, 30,
60 (min)
PC Programming Manual 665