Panasonic KX-NS300 Pc Programming Manual page 127

–
Poltys CCRecord Analogue A.L. (4 ports)
–
Poltys CCRecord Analogue A.L. (8 ports)
–
Poltys CCRecord Analogue A.L. (12 ports)
–
Poltys CCRecord Analogue A.L. (16 ports)
–
Poltys CCRecord Analogue A.L. (24 ports)
–
Poltys CCRecord Digital A.L. (8 ports)
–
Poltys CCRecord Digital A.L. (16 ports)
–
Poltys CCRecord Digital A.L. (24 ports)
–
Poltys CCRecord PRI A.L. (1 port)
–
Poltys CCRecord PRI A.L. (2 ports)
–
Poltys CCRecord SIP A.L. (4 ports)
1. Specify one or two e-mail addresses that will receive expiry notice messages.
Notice
Be sure to enter e-mail addresses correctly. If an address is incorrectly entered, an alert will not be
received when activation keys are about to expire, or information regarding the PBX may be sent
unintentionally to a third party.
2. In Subject enter the text that will be used for the subject header of e-mails that are sent.
For Format—Message body type, select the check boxes to specify whether to include the subject in
the message body.
•
Type1: Message body does not include the subject
•
Type2: Message body includes the subject
3. Click OK when finished.
7.7.2 Utility—Email Notification—System Analysis
Send a specific log file to the designated e-mail address(es).
This screen can be accessed only in On-line mode.
1.
Check the Log File Type drop-down menu, select a log file to send to the e-mail address.
2.
Enter up to 2 e-mail addresses in Email Address 1 and Email Address 2.
3.
In Subject, enter text to be used as the subject line of the e-mail sent.
4.
Click Execute and the mail will be sent at that time.
7.7.3 Utility—Email Notification—Test Email
Send a test e-mail to confirm e-mail sending settings are correctly configured.
This screen can be accessed only in On-line mode.
1.
Enter up to 2 e-mail addresses in Email Address 1 and Email Address 2.
2.
In Subject, enter text to be used as the subject line of the e-mail sent.
3.
Click Execute. A test mail will be sent to the specified address(es).
Mail settings can be viewed and set in 27.3.6 Network Service—[3-6] Client Feature—SMTP.
7.7.2 Utility—Email Notification—System Analysis
PC Programming Manual 127