Panasonic KX-NS300 Pc Programming Manual page 409

11.7 PBX Configuration—[3-7] Group—UM Group
11.7.1 PBX Configuration—[3-7-1] Group—UM Group—System
Settings
The Unified Messaging (UM) ports of a PBX make up a group, called a UM group. This group has a floating
extension number, which can be the destination for incoming calls, redirected calls, transferred calls, etc.
When a call is received at the UM group, the Unified Messaging system can direct the caller to leave a voice
message or dial a number to reach the desired party.
Name
Call Waiting Enables the queuing of calls when all
on UM extension ports of the UM group are
Group busy. (Call Waiting tone is not sent to
any UM port.)
Intercept to Enables the PBX to send the mailbox
Mailbox for number of the called extension to the
Call to Unified Messaging system when a call
Extension is redirected to the UM group by
Intercept Routing. When the Unified
Messaging system receives the mailbox
number, the Unified Messaging system
answers the call with the appropriate
mailbox.
Description
11.7 PBX Configuration—[3-7] Group—UM Group
Value
Range
Disable, PC Programming Manual
Enable
References
9.6 PBX Configuration—[1-1]
Configuration—Slot—UM Port
Property
Feature Manual References
2.2.2.4 Queuing Feature
3.1.1 Unified Messaging System
Overview—UM Ports and the UM
Group
Disable, PC Programming Manual
Enable
References
9.6 PBX Configuration—[1-1]
Configuration—Slot—UM Port
Property
12.1.1 PBX Configuration—[4-1-1]
Extension—Wired Extension—
Extension Settings—Intercept
Destination—Intercept Destination
—When called party does not
answer—Day, Lunch, Break, Night
12.2.1 PBX Configuration—[4-2-1]
Extension—Portable Station—
Extension Settings—Intercept
Destination—Intercept Destination
—When called party does not
answer—Day, Lunch, Break, Night
Feature Manual References
3.1.1 Unified Messaging System
Overview—UM Ports and the UM
Group
PC Programming Manual
Links
409