Panasonic KX-NS300 Pc Programming Manual page 532

17.3 PBX Configuration—[9-3] Private Network—Network Operator (VoIP)
17.3 PBX Configuration—[9-3] Private Network—
Network Operator (VoIP)
This screen allows network operators to be programmed. A network operator is an extension at a remote
PBX that will monitor other PBX extensions using Network Direct Station Selection (NDSS). The settings on
this screen should be programmed at the PBX that is to be monitored (Network Data Transmission for
Centralised Operator Feature—Network PBX ID 2–8). Up to 8 network operators can be programmed.
Name
Network Specifies the number of an
Operator extension at the monitor PBX
Extension (the PBX whose Network Data
No. Transmission for Centralised
Operator Feature—Network
PBX ID is set to 1 in 17.2 PBX
Configuration—[9-2] Private
Network—Network Data
Transmission). Any extension
at the monitor PBX can be
specified here.
IP-GW Card Specifies the slot number of the
Slot No. to card used to send extension
notify BLF status data. This setting is only
data to required when using VoIP to
Network transmit data.
Operator
532 PC Programming Manual
Description Value Range
Max. 16 digits
(consisting of 0–9, *,
and #)
Undefined, 1 – 4, 1 –
5, 2 – 2, 2 – 3, 3 – 2,
3 – 3, 4 – 2, 4 – 3,
Virtual – 1, Virtual –
2, Virtual – 3, Virtual
– 4
Links
PC Programming Manual
References
17.2 PBX Configuration—
[9-2] Private Network—
Network Data Transmission
—Network Data
Transmission for Centralised
Operator Feature—Network
PBX ID
Feature Manual
References
4.3.5.1 Network Direct
Station Selection (NDSS)
PC Programming Manual
References
9.1 PBX Configuration—[1-1]
Configuration—Slot
Feature Manual
References
4.3.5.1 Network Direct
Station Selection (NDSS)