Panasonic KX-NS300 Pc Programming Manual page 648

24.4 UM Configuration—[5-4] System Parameters—Parameters
Name
Outside Transfer
Sequence—EFA
Transfer
Sequence (Up to
16 digits / [0-9 * #
D F R T , ; N A])
Outside Transfer
Sequence—EFA
Transfer
Reconnect
Sequence on
Busy (Up to 16
digits / [0-9 * # D
F R T , ; N A])
Outside Transfer
Sequence—EFA
Transfer
Reconnect
Sequence on No
Answer (Up to 16
digits / [0-9 * # D
F R T , ; N A])
648 PC Programming Manual
Description
Specifies the sequence the
system uses to transfer calls
to trunks using EFA (External
Feature Access). This setting
should match the settings of
the PBX.
Specifies the sequence the
system uses to reconnect the
line when the party transferred
with EFA (External Feature
Access) is busy. This setting
should match the settings of
the PBX.
Specifies the sequence the
system uses to reconnect the
line when the party transferred
with EFA (External Feature
Access) does not answer. This
setting should match the
settings of the PBX.
Value Range
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling
A: Feature Access Code
0–9, , #: Dial Code
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling
A: Feature Access Code
0–9, , #: Dial Code
Max. 16 digits consisting of 0–9,
, # and special codes
D: Disconnecting
F: Flash (Recall)
R: Ringback Tone Detection
T: Dial Tone Detection
, : Dial Pause for 1 s (default)
; : Dial Pause for 3 s (default)
N: Telephone Number Dialling
A: Feature Access Code
0–9, , #: Dial Code
Links