Panasonic KX-NS300 Pc Programming Manual page 182

9.2.3 PBX Configuration—[1-1] Configuration—Slot—System Property—Slot Summary
QoS
Name
Setting for extension
RTP —QoS Ability
*1
Setting for extension
RTP —QoS-ToS
*1
Priority
Setting for extension
RTP —QoS-ToS
*1
Type
Applies to incoming communication from the PBX main unit to the IP terminals. The QoS setting of the IP terminals is configured
*1
individually for each terminal.
9.2.3 PBX Configuration—[1-1] Configuration—Slot—System
Property—Slot Summary
Summary information is displayed for all cards installed in the PBX.
Click one of the following tabs to view a summary of the shelf in the PBX:
•
Physical Shelf: View the physical card shelf.
•
Virtual Shelf: View the virtual card shelf.
Physical Shelf
The Shelf and Slot for each item are displayed for your reference. For details, see Common Programming
Reference Items in 9.1 PBX Configuration—[1-1] Configuration—Slot.
182 PC Programming Manual
Description
Specifies the type of value to be stored
in the ToS field in the IP header, it sends
to IP terminals from the PBX.
Specifies the priority level in the ToS
field, it sends to IP terminals from the
PBX.
Specifies the ToS type in the ToS field
when "ToS" is selected in Setting for
extension RTP—QoS Ability
Value Range
ToS
DSCP
HEX
0-7: When "ToS" is selected
in QoS Ability
0-63: When "DSCP" is
selected in QoS Ability
00-FF: When "HEX" is
selected in QoS Ability
Normal
Monetary Cost
Reliability
Throughput
Delay
Links