Panasonic KX-NS300 Pc Programming Manual page 263

Name
Low Speed Pulse
Dial—Pulse % Break
Low Speed Pulse
Dial—Break Width
Low Speed Pulse
Dial—Make Width
High Speed Pulse
Dial—Pulse % Break
High Speed Pulse
Dial—Break Width
High Speed Pulse
Dial—Make Width
Pulse Type
9.23 PBX Configuration—[1-1] Configuration—Slot—Card Property - LCO type
Description
Specifies the % break for a low
speed pulse dial. This is the ratio
between the break (on-hook) signal
and make (off-hook) signal in a
pulse dial.
Specifies the maximum length of the
break signal in a low speed pulse
dial. Low Speed Pulse Dial—Pulse
% Break on this screen determines
the value that can be specified here.
Specifies the minimum length of the
make signal in a low speed pulse
dial. Low Speed Pulse Dial—Pulse
% Break on this screen determines
the value that can be specified here.
Specifies the % break for a high
speed pulse dial. This is the ratio
between the break (on-hook) signal
and make (off-hook) signal in a
pulse dial.
Specifies the maximum length of the
break signal in a high speed pulse
dial. High Speed Pulse Dial—
Pulse % Break on this screen
determines the value that can be
specified here.
Specifies the minimum length of the
make signal in a high speed pulse
dial. High Speed Pulse Dial—
Pulse % Break on this screen
determines the value that can be
specified here.
Selects the type of pulse dial
transmission appropriate to your
area.
Value Range
Other, 60%, PC Programming
67%
Manual References
9.24 PBX Configuration
—[1-1] Configuration—
Slot—Port Property -
LCO Port
20 + (4 × n) PC Programming
(n=1–15) ms
Manual References
9.24 PBX Configuration
—[1-1] Configuration—
Slot—Port Property -
LCO Port
4 × n (n=3–15) PC Programming
ms
Manual References
9.24 PBX Configuration
—[1-1] Configuration—
Slot—Port Property -
LCO Port
PC Programming
Other, 60%,
67%
Manual References
9.24 PBX Configuration
—[1-1] Configuration—
Slot—Port Property -
LCO Port
12+ (4 × n) PC Programming
(n=1–15) ms
Manual References
9.24 PBX Configuration
—[1-1] Configuration—
Slot—Port Property -
LCO Port
4 × n (n=3–15) PC Programming
ms
Manual References
9.24 PBX Configuration
—[1-1] Configuration—
Slot—Port Property -
LCO Port
Normal,
Sweden, New
Zealand
PC Programming Manual
Links
263