Panasonic KX-NS300 Pc Programming Manual page 286

9.27 PBX Configuration—[1-1] Configuration—Slot—Port Property - PRI Port
Name
COLP, CLIR, Specifies whether each ISDN or
COLR, CNIP, QSIG supplementary service is
CONP, CNIR, used.
CONR, CF The available services depend on
(Rerouting), the setting of Port Type on this
CT, CCBS, screen.
AOC-D, AOC-
E, E911,
3PTY
CCBS Type Selects the type of call from the
network initiated by the CCBS
(Completion of Calls to Busy
Subscriber) feature, from which the
specified number of digits are
deleted.
CCBS Delete Digits on this
screen specifies the number of
digits to delete from the received
number.
286 PC Programming Manual
Description Value Range
For COLP, CLIR,
COLR, CNIP, CONP,
CNIR, CONR, CF
(Rerouting), CT,
CCBS, AOC-D, AOC-
E, E911:
No, Yes
For 3PTY:
No, Yes-3Pty
All, Unknown,
International, National,
Network specific,
Subscriber,
Abbreviated
Links
Feature Manual
References
4.1.2.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP)
4.1.2.3 Advice of Charge
(AOC)
4.1.2.5 Call Forwarding
(CF)—by ISDN (P-P)
4.1.2.7 Call Transfer
(CT)—by ISDN
4.1.2.8 Three-party
Conference (3PTY)—by
ISDN
4.1.2.10 Completion of
Calls to Busy Subscriber
(CCBS)
4.3.4.2 Calling/
Connected Line
Identification
Presentation (CLIP/
COLP) and Calling/
Connected Name
Identification
Presentation (CNIP/
CONP)—by QSIG
4.3.4.3 Call Forwarding
(CF)—by QSIG
4.3.4.4 Call Transfer
(CT)—by QSIG
4.3.4.5 Completion of
Calls to Busy Subscriber
(CCBS)—by QSIG
Feature Manual
References
4.1.2.10 Completion of
Calls to Busy Subscriber
(CCBS)