Panasonic KX-NS300 Pc Programming Manual page 192

9.4.2 PBX Configuration—[1-1] Configuration—Slot—VoIP Property—VoIP (Trunk) Setting
Name
Account Setting—
SIP Server IP
Address
Account Setting—
SIP Server
Domain / Proxy
Domain ( Max.100
characters)
Property Setting—
Select Service
Provider
Property Setting—
Register Ability
Property Setting—
Session Expire
Timer (s)
Property Setting—
From Header -
user Part
Property Setting—
Header Type
192 PC Programming Manual
Description
Specifies the IP
address of the SIP
proxy server. This
setting is
compulsory when
not using the DNS
server.
Note
Specify the IP
address of the
outbound proxy
server, if
provided by the
SIP provider.
Specifies the
domain name
provided by the SIP
provider.
Select the SIP
service provider
after importing SIP
service provider file.
Specifies whether to
send the REGISTER
message to the SIP
server.
Specifies the length
of time that the PBX
waits before
terminating SIP
sessions when no
reply to the repeated
requests is received.
Specifies the value
to be stored in the
username part of the
SIP-URI of the From
header.
Specifies the header
of the SIP message
in which the caller
information is
stored.
Value Range
1.0.0.0–223.255.255.255
Max. 100 characters
Max. 100 characters
Disable, Enable
90–3600 s
User Name, Authentication ID, PBX-CLIP
From Header, P-Preferred-Identity Header
Links