Panasonic KX-NS300 Pc Programming Manual page 312

10.1 PBX Configuration—[2-1] System—Date & Time
10.1 PBX Configuration—[2-1] System—Date &
Time
10.1.1 PBX Configuration—[2-1-1] System—Date & Time—Date &
Time Setting
The date and time of the PBX can be programmed. The date and time will be shown on the display of
extensions (e.g., PT, PS).
This screen can be accessed only in On-line mode.
Name
Date & Indicates the current date and time. Values can be entered by
Time clicking the parameter you want to change and typing the new
value, or by clicking the up/down arrows beside the date and time.
Note
•
When this setting is changed and applied, it may take
between 1 minute and several hours (depending on the
configuration of the PBX network) for all connected IP-PTs
to reflect this change on their displays.
•
At default settings, KX-UT series SIP phones synchronise
to the PBX's date and time once every hour.
10.1.2 PBX Configuration—[2-1-2] System—Date & Time—
SNTP / Daylight Saving
Automatic clock adjustment and Summer time (daylight saving time) settings of the PBX can be
programmed. Automatic clock adjustment can be performed using one of two methods, ISDN & Caller ID or
SNTP (Simple Network Time Protocol).
To set Summer time, click 10.1.2.1 PBX Configuration—[2-1-2] System—Date & Time—SNTP / Daylight
Saving—Daylight Saving.
Note
The NTP server function of the PBX must be enabled for connected KX-UT series SIP phones to receive
automatic time adjustment information from the PBX. See 27.2.4 Network Service—[2-5] Server
Feature—NTP.
Name
Automatic Time
Adjustment
SNTP—SNTP
Server—IP
Address
312 PC Programming Manual
Description
Description
Enables the PBX to automatically
adjust its clock every day according
to the time information provided by
the network.
Specifies the IP address or host
name of the SNTP server.
Value Range
Year: 2000–2035
Month: 01–12
Day: 01–31
Hour: 00–23
Minute: 00–59
Second: 00–59
Value Range
Disable, ISDN &
Caller ID (FSK),
SNTP
1.0.0.0–
223.255.255.255 (IP
address), Max. 253
characters (host
name)
Links
Links
Feature Manual
References
5.5.5 Automatic
Setup
Feature Manual
References
5.5.5 Automatic
Setup