Panasonic KX-NS300 Pc Programming Manual page 260

9.22 PBX Configuration—[1-1] Configuration—Slot—Port Property—Extension Type
Name
DPT Type— Specifies the location number of the
Location No. connected DSS Console or PC Console.
This setting is only available when DPT
Type—Type on this screen is set to DSS
or PC Console.
Note that, depending on system traffic,
there may be a limit to the number of PC
Consoles that can be supported by a
single DLC/DHLC card.
When changing the location number of a
DSS Console for which one or more
SDN buttons are set, all SDN buttons
customised for that device will be
deleted. When you attempt to apply the
new settings, a warning message is
displayed showing the slot and port
number for which SDN buttons will be
deleted. If you do not wish to delete SDN
buttons for this port, click Cancel.
DPT Type— Selects the unit number of the
VM Unit No. connected VPS. This setting is only
available when DPT Type—Type on this
screen is set to VM(DPT).
DPT Type— Specifies the VM port number for the
VM Port No. port. This setting is only available when
DPT Type—Type on this screen is set to
VM(DPT).
DPT Type— Assigns an Air Synchronisation Group
Air Sync number to the CS. This setting is only
Group No available when DPT Type—Type on this
screen is set to Normal.
Headset Turns on or off the use of a headset with
OFF/ON a DPT. This setting is only available
when Port Type on this screen is set to
DPT, DPT(S-DPT), S-Hybrid, or S-
Hybrid(S-DPT).
260 PC Programming Manual
Description Value Range
1-8
1-2
1-12
None, 1
Headset OFF, Headset
ON
Links
Feature Manual
References
2.26.1 Computer
Telephony
Integration (CTI)
Feature Manual
References
2.28.1 Voice Mail
(VM) Group
Feature Manual
References
2.28.1 Voice Mail
(VM) Group
PC
Programming
Manual
References
19.3.1 PBX
Configuration—
[11-3-1]
Maintenance—CS
Synchronisation—
Air
Synchronisation
Feature Manual
References
2.11.4 Headset
Operation