Panasonic KX-NS300 Pc Programming Manual page 268

9.25 PBX Configuration—[1-1] Configuration—Slot—Card Property - BRI type/PRI type
9.25 PBX Configuration—[1-1] Configuration—Slot
—Card Property - BRI type/PRI type
The properties of the BRI or PRI card can be specified.
Name
ISDN CO / QSIG
Master / QSIG Slave
—T200
ISDN CO / QSIG
Master / QSIG Slave
—T202
ISDN CO / QSIG
Master / QSIG Slave
—T203
ISDN CO / QSIG
Master / QSIG Slave
—T301
ISDN CO / QSIG
Master / QSIG Slave
—T302
ISDN CO / QSIG
Master / QSIG Slave
—T303
ISDN CO / QSIG
Master / QSIG Slave
—T304
ISDN CO / QSIG
Master / QSIG Slave
—T305
ISDN CO / QSIG
Master / QSIG Slave
—T308
ISDN CO / QSIG
Master / QSIG Slave
—T309
ISDN CO / QSIG
Master / QSIG Slave
—T310
ISDN CO / QSIG
Master / QSIG Slave
—T313
268 PC Programming Manual
Description
Specifies the maximum time that the PBX
waits for a reply after sending the L2
command to ISDN.
Specifies the maximum time that the PBX
waits for a reply after resending the request to
use an ISDN line as a TIE line.
Specifies the length of time to detect no
communication status of L2.
Specifies the maximum time that the PBX
waits for a reply after making a call to ISDN.
Specifies the maximum time allowed between
each digit on an incoming call. Applies to
overlap receiving.
Specifies the maximum time that the PBX
waits for a reply after sending the SETUP (call
setting) message to ISDN.
Specifies the maximum time allowed between
each digit on an outgoing call. Applies to
overlap sending.
Specifies the maximum time that the PBX
waits for a reply after sending the DISC
(disconnection) message to ISDN.
Specifies the maximum time that the PBX
waits for a reply after receiving the Release
message from ISDN.
Specifies the length of time that the PBX tries
to disconnect the data link, before
disconnecting the call.
Specifies the maximum time that the PBX
waits for a continuance message after
receiving the Incoming Call Proceeding
message.
Specifies the maximum time that the PBX
waits for a reply after sending the Connect
message.
Value Range
0–600 × 100
ms
0–600 × 100 Feature
ms
Manual
References
4.3.1 TIE
Line Service
0–600 × 100
ms
0–18000 × 100
ms
0–600 × 100
ms
0–600 × 100
ms
0–3000 × 100
ms
0–3000 × 100
ms
0–600 × 100
ms
0–3000 × 100
ms
0–3000 × 100
ms
0–600 × 100
ms
Links