Panasonic KX-NS300 Pc Programming Manual page 364

10.9 PBX Configuration—[2-9] System—System Options
Name
PT Operation—
Automatic
Answer for Call
from CO after
PT Operation—
Automatic Hold
by ICM / CO /
ICD Group Key
PT Operation—
Hold key mode
Option 2
Name
Extension Clear
—Call Waiting
Extension Clear
—Fwd/DND
Extension Clear
—Hot Line (Pick-
up Dial)
CODEC—
System CODEC
CODEC—
Network CODEC
364 PC Programming Manual
Description
Specifies the number of
times a PT in Hands-free
Answerback mode will ring
before a conversation is
established automatically
when it receives a call from a
trunk.
Selects whether calls are
disconnected or held when
an INTERCOM, PDN, CO, or
ICD Group button is pressed
while having a conversation.
Selects which extensions
can retrieve a held call or a
call that is transferred by Call
Transfer without
Announcement feature.
Description
Specifies whether the Call
Waiting setting is cleared
when Extension Feature Clear
is performed.
Specifies whether the
FWD/DND setting is cleared
when Extension Feature Clear
is performed.
Specifies whether the Hot
Line setting is cleared when
Extension Feature Clear is
performed.
Selects the codec type for
PSs.
Selects the codec type for
ISDN lines.
Value Range
No Ring, 1 Ring, 2
Rings, 3 Rings
Disable (Disconnect),
Enable
Hold: Any extension
can retrieve a held
call.
Exclusive Hold: Only
the holding extension
can retrieve a held
call.
Value Range
Clear, Do not Feature Manual
clear
References
2.24.2 Extension Feature Clear
Clear, Do not Feature Manual
clear
References
2.24.2 Extension Feature Clear
Clear, Do not Feature Manual
clear
References
2.24.2 Extension Feature Clear
A-Law, Mu-Law
A-Law, Mu-Law
Links
Feature Manual
References
2.4.4 Hands-free
Answerback
PC Programming
Manual References
12.1.4 PBX Configuration—
[4-1-4] Extension—Wired
Extension—Flexible Button
12.2.3 PBX Configuration—
[4-2-3] Extension—Portable
Station—Flexible Button
Feature Manual
References
2.13.1 Call Hold
Feature Manual
References
2.13.1 Call Hold
Links