Administration Terminal Display; Recording And Reporting Alarm Messages - Nortel Meridian Companion Operation Manual

Administration Terminal display

The Administration Terminal has a two-line, 16-character display. The top line
on the display shows you text to assist you during programming and shows
characters as you enter them. The bottom line shows functions you can select
by pressing one of the three buttons (called softkeys) directly below the
display.
Adjusting the contrast
If you find the Administration Terminal's display difficult to read, adjust the
contrast.
Note: You cannot adjust the contrast during a programming session.
1.
2.
3.
4.

Recording and reporting alarm messages

Alarm messages appear on the display when an alarm is raised by the Meridian
Companion system. Your Meridian Companion distributor uses the alarm
messages to diagnose problems.
This is an example of an alarm message:
Press ƒ •‡ .
The display shows Contrast level followed by the current contrast
level shown as a digit.
Press any dialpad button (1 through 9) or
contrast level.
Press OK or ® to select the contrast level you want.
Alarm: 51-3
TIME CLEAR
Meridian Companion Administration Terminal Operations Guide
Using the Administration Terminal Page 3 of 20
DOWN UP
or to select a new