Fault Indicators; System Messages; System Message Fault Indicators And Related Fault Types (Part 1 Of 2) - Nortel Meridian 1 Manual

Page 6 of 190 How to clear faults

Fault indicators

System messages

553-3001-510 Standard 11.00 June 1999
When there is a fault in the system, you may be notified by any combination
of the following indicators:
— system messages
— visual fault indicators
— maintenance display codes
— user reports
Each type of indicator is described below.
System messages are codes with a mnemonic and number, such as PWR0014.
The mnemonic identifies a software program or a type of message. The
number identifies the specific message. Use system messages with other
indicators, such as maintenance display codes and visual indicators, to
identify and clear faults.
Table 2 lists the most common fault indicating messages and the type of fault
they indicate. For a complete list and interpretation of system messages, see
the X11 system messages guide.
Table 2

System message fault indicators and related fault types (Part 1 of 2)

System messages
BSD090
PWR messages
BSD080, 085, 086, 103
CED messages
CIOD, CMON, and CNI messages
INI001, 002, 004, 005
IOD006, 007, 060, 061, 291–297
NWS030, 102, 103, 142
SYS messages
Type of fault
Power
Common equipment