Installing The Meridian Mail Compact Option Hardware; Precautions; Installing The Rsm Assembly Module (Ntmw50Aa) - Nortel Meridian 1 Planning, Installation And Operating Instructions

Page 196 of 536

Installing the Meridian Mail Compact Option hardware

Precautions

Installing the RSM Assembly Module (NTMW50AA)

553-3121-210 Standard 3.0
Chapter 20 — Meridian Mail Compact Option installation and maintenance
The following procedures describe the installation of the Meridian Mail
Compact Option hardware.
If you are installing a Meridian Mail Hospitality Voice Services (HVS)
system, you should install the RSM Assembly Module first before installing
any other Meridian Mail hardware components.
Before touching any components, ensure that you are properly grounded by
putting on the wrist strap connected to the Meridian 1 cabinet. Static
electricity can irreparably damage sensitive electronic components.
Wear an ESD wristband connected to an appropriate ground. The
Meridian Mail Compact Option hardware contains components that
may be damaged by electro-static discharge.
The RSM Assembly Module is a small circuit board contained in a metal case
that you mount outside the Option 11C Compact cabinet. It is connected to
the Meridian Mail Compact Option by cable to a 25-pair connector on the
Option 11C Compact backplane. The RSM Assembly Module allows you to
connect the RS-232 devices to Meridian Mail that are required by hospitality
systems.
Before installing the RSM Assembly Module, ensure that the Meridian
Mail Compact Option CPU card assembly is not plugged into the back
of the Option 11C Compact cabinet
January 1999
CAUTION
Risk of equipment damage
WARNING
Shock hazard