Step (For Ipv4) - HP E4510-48G Command Reference Manual

[Sysname-acl-basic-2000] rule 0 comment This rule is used in geth 1/0/1
# Create a rule in ACL 3000 and define the rule description.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] rule 0 permit ip source 1.1.1.1 0
[Sysname-acl-adv-3000] rule 0 comment This rule is used in geth 1/0/1
# Create a rule in ACL 4000 and define the rule description.
<Sysname> system-view
[Sysname] acl number 4000
[Sysname-acl-ethernetframe-4000] rule 0 deny cos 3
[Sysname-acl-ethernetframe-4000] rule 0 comment This rule is used in geth 1/0/1

step (for IPv4)

Syntax
step step-value
undo step
View
Basic IPv4 ACL view, advanced IPv4 ACL view, Ethernet frame header ACL view
Default Level
2: System level
Parameters
step-value: IPv4 ACL rule numbering step, in the range 1 to 20.
Description
Use the step command to set a rule numbering step for an ACL.
Use the undo step command to restore the default.
By default, the rule numbering step is five.
Examples
# Set the rule numbering step to 2 for ACL 2000.
<Sysname> system-view
[Sysname] acl number 2000
[Sysname-acl-basic-2000] step 2
# Set the rule numbering step to 2 for ACL 3000.
<Sysname> system-view
[Sysname] acl number 3000
[Sysname-acl-adv-3000] step 2
# Set the rule numbering step to 2 for ACL 4000.
<Sysname> system-view
[Sysname] acl number 4000
[Sysname-acl-ethernetframe-4000] step 2
14-19