Display Cluster - HP E4510-48G Command Reference Manual

delete-member
Syntax
delete-member member-number [ to-black-list ]
View
Cluster view
Default Level
2: System level
Parameters
member-number: Number of a member device in a cluster, in the range 1 to 31.
to-black-list: Adds the device removed from a cluster to the blacklist to prevent it from being added to
the cluster.
Description
Use the delete-member command to remove a member device from the cluster.
Note that you should perform the operation to remove a member device from a cluster on the
management device only.
Examples
# Remove the member device numbered 2 from the cluster.
<Sysname> system-view
[Sysname] cluster
[Sysname-cluster] ip-pool 10.1.1.1 24
[Sysname-cluster] build aaa
[aaa_0.Sysname-cluster] delete-member 2
# Remove the member device numbered 3 from the cluster, and add it to the blacklist.
[aaa_0.Sysname-cluster] delete-member 3 to-black-list

display cluster

Syntax
display cluster
View
Any view
Default Level
1: Monitor level
Parameters
None
20-28