Patch Active; Patch Deactive - HP E4510-48G Command Reference Manual

Field
Current
Running
Active
Start-Address

patch active

Syntax
patch active patch-number slot slot-number
View
System view
Default Level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument depend on the patch
file used.
slot slot-number: Specifies a member device by its member ID. The value range of this argument
varies with the device model and can be displayed through the display irf command.
Description
Use the patch active command to activate the specified patch, namely, the system will run the patch.
After you execute the command, all the DEACTIVE patches before the specified patch number are
activated.
Note that:
The command is not applicable to patches in the DEACTIVE state.
After a system reboot, the original ACTIVE patches change to DEACTIVE and become invalid. To
make them effective, you need to activate them again.
Examples
# Activate patch 3 and all the DEACTIVE patches before patch 3 on the device with member ID being
1.
<Sysname> system-view
[Sysname] patch active 3 slot 1

patch deactive

Syntax
patch deactive patch-number slot slot-number
Total number of patches
Number of patches in the RUNNING state
Number of patches in the ACTIVE state
Starting address of the memory patch area in the memory
17-2
Description