Mac Address Table Management Configuration; Mac Address Table Management Configuration Commands - HP E4510-48G Command Reference Manual

13

MAC Address Table Management Configuration

Commands
Interfaces that MAC address table management involves can only be Ethernet ports.

MAC Address Table Management Configuration Commands

display mac-address
Syntax
display mac-address blackhole [ vlan vlan-id ] [ count ]
display mac-address [ mac-address [ vlan vlan-id ] | [ dynamic | static ] [ interface interface-type
interface-number ] [ vlan vlan-id ] [ count ] ]
View
Any view
Default Level
1: Monitor level
Parameters
blackhole: Destination blackhole MAC address entries. These entries do not age but you can add or
remove them. The packets whose destination MAC addresses match destination blackhole MAC
address entries are dropped.
vlan vlan-id: Displays MAC address entries of the specified VLAN, where vlan-id is in the range 1 to
4094.
count: Displays the total number of MAC addresses in the MAC address table.
mac-address: Displays MAC address entries in a specified MAC address, in the format of H-H-H.
dynamic: Displays dynamic MAC address entries. Aging time is set for these entries.
static: Displays static MAC address entries. Similar to blackhole MAC address entries, these entries
do not age but you can add or remove them.
interface interface-type interface-number: Displays MAC address learning status of the specified
interface. interface-type interface-number specifies an interface by its type and number.
13-1