HP E4510-48G Command Reference Manual page 1243

tos
Syntax
tos value
undo tos
View
DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default Level
2: System level
Parameters
value: Value of the ToS field in the IP header in an NQA probe packet, in the range 0 to 255.
Description
Use the tos command to configure the value of the ToS field in the IP header in an NQA probe packet.
Use the undo tos command to restore the default.
By default, the ToS field in the IP header of an NQA probe packet is 0.
Examples
# Configure the ToS field in a IP packet header in an NQA probe packet as 1.
<Sysname> system-view
[Sysname] nqa entry admin test
[Sysname-nqa-admin-test] type icmp-echo
[Sysname-nqa-admin-test-icmp-echo] tos 1
ttl
Syntax
ttl value
undo ttl
View
DLSw, FTP, HTTP, ICMP echo, SNMP, TCP, UDP echo, UDP jitter, voice test type view
Default Level
2: System level
Parameters
value: Maximum number of hops a probe packet traverses in the network, in the range 1 to 255.
Description
Use the ttl command to configure the maximum number of hops a probe packet traverses in the
network.
Use the undo ttl command to restore the default.
18-35