Rmon History - HP E4510-48G Command Reference Manual

none: Performs no action when the event occurs.
trap trap-community: Trap event. The system sends a trap with a community name when the event
occurs. trap-community specifies the community name of the network management station that
receives trap messages, a string of 1 to 127 characters.
owner text: Owner of the entry, a string of 1 to 127 characters. It is case sensitive and space is
supported.
Description
Use the rmon event command to create an entry in the RMON event table.
Use the undo rmon event command to remove a specified entry from the RMON event table.
When create an event entry, you can define the actions that the system will take when the event is
triggered by its associated alarm in the alarm table. According to your configuration, the system can
log the event, send a trap, do both, or do neither at all.
Related commands: display rmon event, rmon alarm, rmon prialarm.
When you create an entry, if the values of the specified event description (description string),
event type (log, trap, logtrap or none), and community name (trap-community or
log-trapcommunity) are identical to those of the existing event entry, the system considers their
configurations are the same and the creation fails.
You can create up to 60 alarm entries.
Examples
# Create event 10 in the RMON event table.
<Sysname> system-view
[Sysname] rmon event 10 log owner user1

rmon history

Syntax
rmon history entry-number buckets number interval sampling-interval [ owner text ]
undo rmon history entry-number
View
Ethernet interface view
Default Level
2: System level
Parameters
entry-number: History control entry index, in the range 1 to 65535.
buckets number: History table size for the entry, in the range 1 to 65,535.
12-13