Qos Wrr Group - HP E4510-48G Command Reference Manual

View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
None
Description
Use the qos wrr command to enable weighted round robin (WRR) on a port or port group.
Use the undo qos wrr command to restore the default.
By default, all the ports adopt the WRR queue scheduling algorithm, with the weight values assigned to
queue 0 through queue 7 being 1, 2, 3, 4, 5, 9, 13, and 15.
Related commands: display qos wrr interface.
Examples
# Enable WRR on GigabitEthernet 1/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/0/1
[Sysname-GigabitEthernet1/0/1] qos wrr

qos wrr group

Syntax
qos wrr queue-id group { sp | group-id weight schedule-value }
undo qos wrr
View
Ethernet interface view, port group view
Default Level
2: System Level
Parameters
queue-id: ID of the queue, in the range of 0 to 7.
group-id: It can only be 1.
weight schedule-value: Specifies the scheduling weight of a queue, rang from 1 to 15.
sp: Configures SP queuing.
Description
Use the qos wrr command to configure Weighted Round Robin (WRR) queue scheduling algorithm or
the SP + WRR queue scheduling algorithm on a port or port group.
Use the undo qos wrr command to restore the default queue-scheduling algorithm on the port.
4-7