Display Ipv6 Pathmtu - HP E4510-48G Command Reference Manual

Parameters
all: Displays the total number of all neighbor entries, including neighbor entries acquired dynamically
and configured statically.
dynamic: Displays the total number of all neighbor entries acquired dynamically.
static: Displays the total number of neighbor entries configured statically.
slot slot-number: Displays the total number of neighbor entries of a specified device in an IRF. If no
IRF is formed, the total number of neighbor entries of the current device is displayed only. The
slot-number argument indicates the member ID of the device.
interface interface-type interface-number: Displays the total number of neighbor entries of a specified
interface.
vlan vlan-id: Displays the total number of neighbor entries of a specified VLAN whose ID ranges from
1 to 4094.
Description
Use the display ipv6 neighbors count command to display the total number of neighbor entries
satisfying the specified condition.
Examples
# Display the total number of neighbor entries acquired dynamically.
<Sysname> display ipv6 neighbors dynamic count
Total dynamic entry(ies): 2

display ipv6 pathmtu

Syntax
display ipv6 pathmtu { ipv6-address | all | dynamic | static }
View
Any view
Default Level
1: Monitor level
Parameters
ipv6-address: IPv6 address whose PMTU information is to be displayed.
all: Displays all PMTU information.
dynamic: Displays all dynamic PMTU information.
static: Displays all static PMTU information.
Description
Use the display ipv6 pathmtu command to display the PMTU information of IPv6 addresses.
Examples
# Display all PMTU information.
12-11