Port Multicast-Vlan - HP E4510-48G Command Reference Manual

undo port { all | interface-list }
View
Multicast VLAN view
Default Level
2: System level
Parameters
interface-list: Specifies a port in the form of interface-type interface-number, or a port range in the form
of interface-type start-interface-number to interface-type end-interface-number, where the end
interface number must be greater than the start interface number.
all: Deletes all the ports in the current multicast VLAN.
Description
Use the port command to assign the specified port(s) to the current multicast VLAN.
Use the undo port command to delete the specified port(s) or all ports from the current multicast
VLAN.
By default, a multicast VLAN has no ports.
Note that:
A port can belong to only one multicast VLAN.
Only the following types of ports can be configured as multicast VLAN ports: Ethernet, or Layer 2
aggregate ports.
Examples
# Assign ports GigabitEthernet1/0/1 through GigabitEthernet1/0/5 to multicast VLAN 100.
<Sysname> system-view
[Sysname] multicast-vlan 100
[Sysname-mvlan-100] port gigabitethernet1/0/1 to gigabitethernet1/0/5

port multicast-vlan

Syntax
port multicast-vlan vlan-id
undo port multicast-vlan
View
Ethernet port view, Layer 2 aggregate port view, port group view.
Default Level
2: System level
Parameters
vlan-id: VLAN ID of the multicast VLAN you want to assign the current port(s) to, in the range of 1 to
4094.
2-3