HP E4510-48G Command Reference Manual page 438

Maximum number of balanced paths : 1
Update time :
Suppress time : 120 sec(s) Garbage-collect time : 120 sec(s)
update output delay :
TRIP retransmit time :
TRIP response packets retransmit count :
Silent interfaces : None
Default routes : Only Default route cost : 3
Verify-source : Enabled
Networks :
192.168.1.0
Configured peers : None
Triggered updates sent : 0
Number of routes changes : 0
Number of replies to queries : 0
Table 3-1 display rip command output description
Field
RIP process
RIP version
Preference
Checkzero
Default-cost
Summary
Hostroutes
Maximum number of balanced paths
Update time
Timeout time
Suppress time
update output delay
output count
Garbage-collect time
TRIP retransmit time
TRIP response packets retransmit count
Silent interfaces
Default routes
30 sec(s) Timeout time
20(ms) output count :
5 sec(s)
RIP process ID
RIP version 1 or 2
RIP route priority
Indicates whether the zero field check is enabled for
RIPv1 messages.
Default cost of the redistributed routes
Indicates whether route summarization is enabled
Indicates whether to receive host routes
Maximum number of load balanced routes
RIP update interval
RIP timeout time
RIP suppress interval
RIP packet sending interval
Maximum number of RIP packets sent at each interval
RIP garbage collection interval
TRIP retransmit interval for sending update requests
and responses.
Maximum retransmit times for update requests and
responses
Number of silent interfaces, which do not periodically
send updates
Indicates whether a default route is sent to RIP
neighbors
only means only a default route is advertised.
originate means a default route is advertised along
with other routes.
disable means no default route is advertised.
3-4
: 180 sec(s)
3
36
Description