Habp Enable - HP E4510-48G Command Reference Manual

<Sysname> display habp traffic
HABP counters :
Packets output: 0, Input: 0
ID error: 0, Type error: 0, Version error: 0
Sent failed: 0
Table 6-3 display habp traffic command output description
Packets output
Input
ID error
Type error
Version error
Sent failed

habp enable

Syntax
habp enable
undo habp enable
View
System view
Default Level
2: System level
Parameters
None
Description
Use the habp enable command to enable HABP.
Use the undo habp enable command to disable HABP.
By default, HABP is enabled.
HABP is required when and only when the cluster function and 802.1X (or MAC authentication) are
enabled on the device.
Examples
# Enable HABP.
<Sysname> system-view
[Sysname] habp enable
Field
Number of HABP packets sent
Number of HABP packets received
Number of packets with an incorrect ID
Number of packets with an incorrect type
Number of packets with an incorrect version number
Number of packets failed to be sent
Description
6-3