ripng metricout
Syntax
ripng metricout value
undo ripng metricout
View
Interface view
Default Level
2: System level
Parameters
value: Additional metric to advertised routes, in the range of 1 to 16.
Description
Use the ripng metricout command to configure an additional metric for RIPng routes advertised by an
interface.
Use the undo rip metricout command to restore the default.
The default additional routing metric is 1.
Related commands: ripng metricin.
Examples
# Set the additional metric to 12 for routes advertised by VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 100
[Sysname-Vlan-interface100] ripng metricout 12
ripng poison-reverse
Syntax
ripng poison-reverse
undo ripng poison-reverse
View
Interface view
Default Level
2: System level
Parameters
None
Description
Use the rip poison-reverse command to enable the poison reverse function.
5-13