HP E4510-48G Command Reference Manual page 580

Parameters
inbound: Displays the QoS policy applied globally in the inbound direction of all ports.
slot slot-number: Displays the global QoS policy configuration of the specified device in the IRF. If the
slot-number argument is not specified, the global QoS policy configuration of all devices in the IRF is
displayed. If no IRF is formed, the global QoS policy configuration of the current device is displayed.
The range for the slot-number argument depends on the number of devices and the numbering of the
devices in the IRF.
Description
Use the display qos policy global command to display information about a global QoS policy.
Examples
# Display information about the global QoS policy in the inbound direction.
<Sysname> display qos policy global inbound
Direction: Inbound
Policy: abc_policy
Classifier: abc
Operator: AND
Rule(s) : If-match dscp cs1
Behavior: abc
Committed Access Rate:
CIR 640 (kbps), CBS 4000 (byte), EBS 4000 (byte)
Green Action: pass
Red Action: discard
Yellow Action: pass
Green : 0(Packets)
Table 1-6 display qos policy global command output description
Field
Direction
Policy
Classifier
Operator
Rule(s)
Behavior
Committed Access Rate
CIR
CBS
EBS
Direction in which the policy is applied globally
Policy name
Class name
Failed indicates that the policy is not successfully applied
Logical relationship between match criteria
Match criteria
Name and the corresponding configuration information of a
behavior
Rate limiting information
Committed information rate in kbps
Committed burst size in bytes, that is, the depth of the token
bucket for holding burst traffic
Excess burst size in bytes, that is, the traffic exceeding CBS
when two token buckets are used
1-17
Description