Ntdp Hop - HP E4510-48G Command Reference Manual

View
User view
Default Level
2: System level
Parameters
None
Description
Use the ntdp explore command to start topology information collection manually.
Examples
# Start the topology information collection.
<Sysname> ntdp explore

ntdp hop

Syntax
ntdp hop hop-value
undo ntdp hop
View
System view
Default Level
2: System level
Parameters
hop-value: Maximum hop for collecting topology information, in the range 1 to 16.
Description
Use the ntdp hop command to set maximum hop for collecting topology information.
Use the undo ntdp hop command to restore the default.
By default, the value is 3.
Note that this command is only applicable to the topology-collecting device. A bigger number of hops
requires more memory of the topology-collecting device.
Examples
# Set the hop count for topology information collection to 5.
<Sysname> system-view
[Sysname] ntdp hop 5
20-12