Display Ipv6 Routing-Table - HP E4510-48G Command Reference Manual

View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the display ip routing-table statistics command to display the route statistics of the routing
table.
Examples
# Display route statistics in the routing table.
<Sysname> display ip routing-table statistics
Proto route
DIRECT 24
STATIC 4
RIP 0
Total 28
Table 1-3 display ip routing-table statistics command output description
Field
Proto
route
active
added
deleted
freed
Total

display ipv6 routing-table

Syntax
display ipv6 routing-table
View
Any view
Default Level
1: Monitor level
active added
4 25
1 4
0 0
5 29
Origin of the routes.
Number of routes from the origin
Number of active routes from the origin
Number of routes added into the routing table since the router started up or the
routing table was last cleared
Number of routes marked as deleted, which will be freed after a period.
Number of routes that got freed, that is, got removed permanently.
Total number
deleted freed
1 0
0 0
0 0
1 0
Description
1-12